Georgia Joins List of States Banning Fines for Alarm Companies When Customers Generate a False Alarm

Atlanta, Georgia (April 1, 2021) – The Georgia General Assembly has approved a bill that would ban counties or municipal corporations from fining alarm companies for false alarms generated by a customer and through no fault of the alarm system’s contractor.

“This bill has wider implications than for just our industry,” said John Loud, Vice President of Electronic Security Association (ESA) and President of LOUD Security Systems. “The concept of fining a company for a problem caused by its customers is the equivalent of sending someone’s speeding ticket to Ford and sets a precedent that could be a threat to many industries.”

“These policies do little to change user behavior, deny the user the right to confront their accuser and access to due process, and fines an innocent party for the actions of another,” said Stan Martin, Executive Director of the Security Industry Alarm Coalition (SIAC).

The introduction of the legislation follows a bitter three-year fight after the City of Sandy Springs passed a punitive ordinance that fined alarm companies. The city’s success in defending the legislation in court caused the legislature to act. Only one other Georgia city, Brookhaven, followed Sandy Springs’ lead.

A number of other states have passed bills similar to the Georgia bill in recent years including California, Florida, New Jersey, Texas, Tennessee and Iowa.

“There has never been any evidence that fining alarm companies was any more effective than the model alarm ordinance that is widely utilized nationally and endorsed by the Georgia Association of Chiefs of Police,” said Martin.

“The model ordinance, which fines alarm users, obtains an average 60% reduction in false dispatches and impacts those causing most of the problems. In fact, 85% of alarm systems generate no calls to the police in any given year.”

Under the law companies are responsible for false alarms they cause due to faulty equipment or installation or failure to use a mandated system requiring two calls to an alarm site before notifying police.

“Common sense prevailed,” said Loud. “Our industry stands ready to work with any community that wishes to reduce unnecessary dispatches with a proven model and experts ready to assist.”

Governor Kemp is expected to sign the bill later this month.

Shared by: David Margulies, PRExperts

Congratulations to TMA Members Celebrating Anniversaries

Join with TMA staff in congratulating the following TMA members for their long-time service:
1. Tracy Ehrsam is marking her 33rd anniversary at Habitec Security, Inc.
2. Joyce LaFond is marking her 25th anniversary at American Alarm & Communications, Inc.
3. Jennifer Badalich is marking her 7th anniversary at Quick Response Marketing

Georgia Joins List of States Banning Fines for Alarm Companies When Customers Generate a False Alarm

Atlanta, Georgia (April 1, 2021) – The Georgia General Assembly has approved a bill that would ban counties or municipal corporations from fining alarm companies for false alarms generated by a customer and through no fault of the alarm system’s contractor.

“This bill has wider implications than for just our industry,” said John Loud, Vice President of Electronic Security Association (ESA) and President of LOUD Security Systems. “The concept of fining a company for a problem caused by its customers is the equivalent of sending someone’s speeding ticket to Ford and sets a precedent that could be a threat to many industries.”

“These policies do little to change user behavior, deny the user the right to confront their accuser and access to due process, and fines an innocent party for the actions of another,” said Stan Martin, Executive Director of the Security Industry Alarm Coalition (SIAC).

The introduction of the legislation follows a bitter three-year fight after the City of Sandy Springs passed a punitive ordinance that fined alarm companies. The city’s success in defending the legislation in court caused the legislature to act. Only one other Georgia city, Brookhaven, followed Sandy Springs’ lead.

A number of other states have passed bills similar to the Georgia bill in recent years including California, Florida, New Jersey, Texas, Tennessee and Iowa.

“There has never been any evidence that fining alarm companies was any more effective than the model alarm ordinance that is widely utilized nationally and endorsed by the Georgia Association of Chiefs of Police,” said Martin.

“The model ordinance, which fines alarm users, obtains an average 60% reduction in false dispatches and impacts those causing most of the problems. In fact, 85% of alarm systems generate no calls to the police in any given year.”

Under the law companies are responsible for false alarms they cause due to faulty equipment or installation or failure to use a mandated system requiring two calls to an alarm site before notifying police.

“Common sense prevailed,” said Loud. “Our industry stands ready to work with any community that wishes to reduce unnecessary dispatches with a proven model and experts ready to assist.”

Shared by: David Margulies, PRExperts

NJELSA Challenging New State Law

The New Jersey Electronic Life Safety Association (NJELSA) is legally challenging a new NJ law that prohibits licensed alarm dealers from working in any facility receiving public funds unless they were participating in an approved apprenticeship program with an ERISA certified pension trust fund. This bill effectively forces all alarm dealers to either stop doing business with clients they may have serviced for decades or pay the unions to participate in their plan.

Unfortunately, some of NJELSA’s members have already been denied renewal of their public works permits, others have capitulated by paying thousands of dollars to unions to retain the right to do business with their customers.

TMA members who do business in New Jersey either directly installing systems in publicly funded facilities or monitoring these accounts for their customers may want to get the details and learn how to best protect their business in the state.

LEARN MORE

FirstNet Expands

FirstNet®, America’s public safety network, now covers more than 2.71 million square miles. As public safety’s network partner, AT&T* has moved quickly to bring more coverage, boost capacity and drive new capabilities for first responders and the communities they serve – rural, urban and tribal. In 2020, we added nearly 100,000 square miles to the FirstNet coverage footprint (that’s like covering the entire state of Oregon).

Today, more than 15,000 agencies and organizations – accounting for more than 2 million connections nationwide – have subscribed to FirstNet.

Read the full announcement on AT&T’s website – https://about.att.com/story/2021/fn_expands.html

Learn more about FirstNet certification for your company elsewhere on TMA’s website.

TMA’s ASAP-to-PSAP Program Marks its 79th and 80th ECCs

The Monitoring Association (TMA) is pleased to announce the addition its 79th and 80th municipalities to go live with its expanding ASAP-to-PSAP program. Launched in 2011 as a public-private partnership, TMA’s ASAP-to-PSAP service is designed to increase the accuracy and efficiency of calls for service from alarm companies to PSAPs.

“TMA’s ASAP-to-PSAP program experienced nice momentum in 2020 with a new annual adoption record of 18 ECCs across the country,” stated TMA President Don Young. “As the network of ASAP compatible ECCs continues to grow, those not yet using the service are learning firsthand from their colleagues about the time and accuracy improvements that come with ASAP and therefore the enhanced capability for saving lives in the alarm response process. TMA remains proud to deliver this unique service to its members and accomplish their mission for providing professional monitoring capabilities to help better protect life and property in both residential and commercial settings.”

TMA welcomed its 79th ECC, the Cayuga County NY 9-1-1 Center and the 6th ECC in the state of New York to implement ASAP. Cayuga County first went live with Vector Security and Rapid Response Monitoring. A second wave of companies including ADT, Amherst Alarm, Affiliated Monitoring, AT&T Digital Life, Guardian Protection, Brinks Home Security, National Monitoring Center, Protection One, Security Central, Tyco (Johnson Controls), Vivint, and Doyle went live with Cayuga County just days later.

“This is a seamless procedure allowing alarm companies to transfer alarm activations and the data associated directly to our computer aided dispatch system”, said Denise Spingler, Cayuga County 9-1-1 Administrator. “This allows for a more expedited dispatch of emergency services.”

The Paradise Valley AZ Police Communications Center is the 80th Emergency Communications Center (ECC) in the United States and 4th ECC in the state of Arizona to implement ASAP. Paradise Valley went live with Affiliated Monitoring, AT&T Digital Life, ADT, Alert 360, Guardian Protection, Brinks Home Security, National Monitoring Center, Protection One, Rapid Response Monitoring (plus A3 Smart Home), Security Central, Tyco (Johnson Controls), Vivint, and Securitas over a two day period in mid-December.

Support Industry-wide Appeal for AT&T 3G Sunset Extension

The Monitoring Association (TMA) is taking part in an industry-wide advocacy campaign calling for AT&T to delay their 3G sunset, which is currently set for February 2022. The campaign is being coordinated and led by the Alarm Industry Communications Committee (AICC), which is chaired by longtime TMA member Lou Fiore.

While the AICC has been in communication with the various House and Senate Committee staff with jurisdiction over telecom issues, it is important that Committee staff for the members hear from you directly – especially if you have a significant presence or customer base in their state, or even better, House members in your district. They need to know that this is a real problem that will impact the safety of life and property, as well as the safety and health of the homebound individuals who they represent.

AICC has put together a list of key members on the House and Senate Committees, as well as the Committee staff that is working on these issues and a letter template for you to send. It is important that you contact both the staff of the representatives on the key committees and the full Committee staff.

A number of you have responded to an earlier request, but we need what has been a trickle to become a flood. We are seeing some positive responses from Members of Congress, but it’s not enough. Please, if you haven’t done so, send an email as directed and ask all your employees to do the same.

Please let me know if you have any questions. Our lobbyist Bill Signer, AICC Chair Lou Fiore, or I will endeavor to assist you.

Thank you in advance for your help.

Sincerely,

Celia T. Besore
Executive Director, TMA
ceo@tma.us | (703) 660-4913

OUR ASK:

Send the letter template, linked below, to the House and Senate representatives in states where your company does business, as well as the full Committee staff. Pass along the resources to your employees to do the same.

RESOURCES:

  1. Full Introduction Letter
  2. Contact List
  3. Letter Template
  4. Industry and Issue Backgrounder

ABOUT AICC:

The Alarm Industry Communications Committee (AICC), a committee of The Monitoring Association (TMA), is composed of representatives of TMA, the Electronic Security Association (ESA), the Security Industry Association (SIA) and major alarm companies and manufacturers. The AICC chair is Louis T. Fiore, L.T. Fiore, Inc. (ltfiore@aol.com).

 

Important Message for Washington, DC Service Providers

Area Code Overlay Approved for the Washington, DC 202 Area Code

Attention: Alarm and Security Service/Equipment Providers

To ensure a continuing supply of telephone numbers, the Public Service Commission of the District of Columbia approved the addition of the new 771 area code to the geographic region served by the 202 area code.  This process is known as an area code overlay.

What is an area code overlay?

An overlay is the addition of another area code (771) to the same geographic region as an existing area code (202). An overlay does not require customers to change their existing area code or telephone number but does require using a new dialing procedure to complete calls.

What will be the new dialing procedure?

The new dialing procedure will require that all calls in the 202 area code that are currently dialed with seven digits will need to be dialed using area code + telephone number.  The same dialing procedure will apply to telephone numbers that are assigned with the new 771 area code.

How does this affect providers of alarm and security services and equipment?

As a result of the overlay, a new local dialing procedure requires callers to dial area code + telephone number. 

Alarm and security services and equipment currently located in the 202 area code and programmed to dial only seven digits must be updated or reprogrammed to dial area code + telephone number for all calls in the 202/771 area code.

Reprogramming of alarm equipment should be completed by October 9, 2021.

To verify that equipment can complete calls to the new 771 area code, a special test number, 771-990-TEST (8378), will be in service beginning August 9, 2021 and it will remain active through December 9, 2021.

When will the change begin?

Effective April 10, 2021, if you have a 202 area code, you should begin dialing the area code + telephone number whenever you place a call.  If you forget and dial just seven digits, your call will still be completed.

Beginning October 9, 2021, if you have a 202 area code, you must dial the area code + telephone number on all calls, including calls within the same area code.  On and after this date, if you do not dial the area code + telephone number, your calls will not complete and a recording will instruct you to hang up and dial again, including the area code.

Beginning November 9, 2021, new telephone lines or services may be assigned numbers using the new 771 area code.

What will remain the same?

  • Telephone number, including current area code, will not change.
  • The price of a call, coverage area, or other rates and services will not change due to the overlay.
  • What is a local call now will remain a local call regardless of the number of digits dialed.
  • Emergency services can still dial just three digits to reach 911.
  • If 211, 311, 411, 511, 611, 711 or 811 are currently available in your community, these calls may still be dialed using just the three digits.

Who may you contact with questions?

Customers with questions regarding the dialing procedure change should be directed to their local service provider, or they can contact the Public Service Commission of the District of Columbia at https://dcpsc.org.

 

Sincerely,

Co-Chairs for the DC 202/771 Area Code Industry Team

Laura Dalton, laura.r.dalton@verizon.com

Karen Riepenkroger, karen.s.riepenkroger@t-mobile.com

National Suicide Prevention Lifeline – New Dialing Code

Please read the announcement regarding changes needed to be made by intrusion and fire services companies in preparation for the nationwide implementation of 988 as the 3-digit abbreviated dialing code for the National Suicide Prevention Lifeline.

It is imperative that alarm companies reprogram alarm panels in customers’ premises if they currently are programed to dial out seven digits to reach the alarm monitoring bureau.  If they are dialing out seven digits now, they must be re-programed to dial out a ten-digit number which includes the area code plus telephone number.  Such updates or reprogramming must occur between April 24, 2021 and October 24, 2021 (the permissive dialing period).  Starting these efforts before April 24, 2021 may result in failed calls if permissive 10-digit dialing has not yet been implemented.  The changes need to be completed by October 24, 2021.

No change is needed if the alarm panels are currently dialing out ten-digits, or if they are dialing out a toll free number (800, 888, 844, etc.) to reach the alarm monitoring bureau.

Additional information about this transition on the NANPA website at https://nationalnanpa.com/transition_to_10_digit_dialing_for_988/index.html

ANNOUNCEMENT

Our gift to you this holiday – Save 20% on operator training!

As this year comes to a close, all of us at TMA wanted to say, “Thank You!” We are so grateful for your membership and participation in the professional monitoring community. It’s been a year of unforeseen obstacles for all of us—personally and professionally.
To show our appreciation, we are offering a 20% discount on all operator training offered through our training portal at TMATraining.org.
While we couldn’t solve every challenge 2020 threw our collective way, we’ve worked hard to support you virtually through our Town Halls, Annual Meeting, and OPS-TECH events curated to make your job easier.
Next year, we’re focused on making access to collaboration even easier, by continuing with our virtual education platform, expanding our training resources, and enhancing your ability to apply industry best-practices.
Here are just a few items we’re excited about delivering in 2021:
  • MYM, April 20-22
  • Online Operator Candidate Assessment Tool
  • Proprietary Member Users Forum
  • Upgrades to TMATraining.org
  • Annual Meeting, October 9-13, Ritz Carlton Kapalua, Maui
  • OPS-TECH, Charlotte, NC – Hosted by CPI Security (Dates TBD)
We’re committed to delivering content you’ll love in 2021. Make sure to keep an eye on TMA.us for registration information and other updates.
TMA’s Operator Online Courses
To learn more about TMA’s Operator Online Training programs, visit the TMA website (Links below). When you are ready to purchase, contact our helpdesk (8 AM- 8 PM) by calling (502) 254-1506 or emailing support@TMATraining.org. (Note: Special pricing only available for a maximum of 10 course purchases.) 
Just remember…this special offer expires December 31st at midnight!